TJ Wrangler Jeep Frame 2003-2006

Don't spend hours sanding, grinding and painting that old frame only to have it rust again. Throttle Down Kustoms' frames are better than OE. Start with a solid frame for your project!

TDK Frame Manufacturing Process

• TDK frames are CNC mandrel bent for better than OEM precision.
• Brackets are CNC laser cut out of 3/16" and 1/4" P&O steel plate.
• Frames and brackets are hand welded in Montana.

Steel

• Jeep frames are made from 2" x 4" rectangular 3/16" wall A500 tubing.
• Brackets are made with 3/16" and 1/4" P&O steel.

Options

• You can have the frame customized to meet your needs. Contact us to learn more.

Included Mounting Points

• Steering Box
• Front and Rear Upper and Lower Control Arm mounts
• TDK Skid Plate included with frame. (TDK Skid Plate pattern only; the stock TJ Skid Plate will not work with the TDK TJ Frame)
• Sway Bar, Front and Rear
• Body Mounts, Grille Mount
• Front Bumper
• Rear Crossmember Standard
• Gas Tank
• Front and Rear Bump Stop Holes
• Motor Mount welded in (6cy)
• Steering Shaft Idler Mounting location
• Rear Coil Spring Mount
• Rear Shock Mounts with 5/16" nuts welded in.
• Rear Track Bar Mount set up for stock rear track bar.
• Front Coil Spring Mount with Shock Mounts welded to frame
• Front Track Bar Mount, set up for Adjustable track bar comes with the TDK Frame.

Note:

• All frames are shipped bare metal.
• Throttle Down Kustoms does not offer the stock battery box welded to the frame. The end user will have to reinstall the stock battery tray to the new frame.
• Some stock running boards do not work the same. You may have to modify them to work.