2007-2011 Jeep JKU Frame

From: $7,999.00


SKU: TDK-07-11JKU Frame Categories: ,

Description

The JK

In 2006, Jeep released a new generation of the Wrangler family, the Jeep JK/JKU. As the successor of the extremely popular TJ; the JK rolled off the line with a larger frame, longer wheelbase, and wider track width. Along with these improvements also came the option of a 4 door, the JKU (Unlimited). After a 12 year production run and over 2.1 million units produced, the JK/JKU continues to be a highly desired and commonly used model for offroad and 4×4 enthusiasts.

Why Now?

Since the release of the JK/JKU 18 years ago, TDK has gotten a handful of calls and emails regarding a full stock replacement frame. In the last two years, interest in this frame has greatly increased and made it clear that developing this frame was a must. After almost two decades, it was about time to make the strongest frame on the market available to JK/JKU owners all over the world.

How’d we do it?

When looking at the JK frame its no secret that there is a lot more going on than its predecessor, the TJ. With the stouter frame and addition of multiple crossmembers, there is a lot to take in. Our JK frame rails are constructed for 2″ x 5″ x 3/16″ frame rail center sections, with mandrel bent 2″ x 4″ x 3/16″ front and rear frame rail sections welded together. This provides identical frame dimensions to your factory frame while being immensely stronger. When it comes to joining these two frame rails together, our fabricated front and rear crossmembers, transmission crossmembers, and gas tank crossmembers are what make two frame rails into one complete frame. These crossmembers in addition to all; body mounts, shock mounts, coil buckets, suspension-link mounts, bumpers mounts, track bar mounts, steering box mount, and motor mounts are all made from laser cut 3/16″ steel plate. Then, what looks like a stack of miscellaneous parts is MIG-welded and handcrafted by our professional frame fabricators to create the strongest stock replacement JK/JKU frame on the market.

Frame Parts Breakdown – Stock Replacement (all included in purchase)

  • Front and Rear Crossmembers
  • Gas Tank Crossmembers (for use with factory gas tank)
  • Transmission Crossmember and Crossmember Mounts
    • 2007-2011 4-speed Auto (42RLE) / 6-speed Manual (NSG370)
  • Motor Mounts
    • 2007-2011; 3.8L EGH V-6
  • Body Mounts
  • Front and Rear Bumper Mounts
  • Front and Rear Shock Mounts
  • Front and Rear Coil Buckets
  • Front and Rear Track Bar Mounts
  • Steering Box Mount
  • Front Upper and Lower Link Mounts
  • Rear Upper and Lower Link Mounts

Important Notes

  • Exhaust Modification: Modification of the exhaust may be required for proper fitment and performance.
  • Brake / Fuel Lines: Additional brake line and fuel line mounting holes may be required for proper fitment and performance. This can be accomplished by simply drilling a 1/4″ hole and tapping it to 5/16″ in the desired position on the frame.
  • Aftermarket fitment: If you are going this far into building your JK/JKU, odds are you will have other aftermarket parts you are going to be installing, While most aftermarket products should fit and have no issues, TDK cannot guarantee fitment of any aftermarket products on our frame. This frame is based off factory measurements and factory parts. Throttle Down Kustoms holds no responsibility in the fitment of parts from other manufacturers. 

Additional information

Weight 1200 lbs
Dimensions 190 × 60 × 30 in

Note: Weight and dimensions listed may not represent actual product weight or size and may only be used for shipping purposes.