1997-2006 Jeep TJ Krawler Frame

From: $2,500.00

Category:

Description

Throttle Down Kustoms is excited to present our newest frame, The TJ “Krawler” Frame. We aren’t offering this frame for standard bolt-on suspension kits. It is for the 4×4 enthusiast who is looking for a foundation to build his or her ultimate version of what a TJ should be.

The “Krawler” Frame. This is not our standard replacement frame, and we did it for a reason. We designed this frame for those wanting to go beyond the limitations of a standard TJ frame. This was achieved by taking out the front and rear bends of the frame and running the frame rail straight out. Why? By essentially “raising” the frame on the front and rear, you get increased departure angle. This is a huge advantage when building the ultimate wheeling rig and is something every 4×4 builder works to improve on their vehicle. Not only will the wheeling characteristics improve, but so will the ability to design, fabricate, and mount suspension. This is most noticeable in the rear section of the frame. In the design process, we moved the rear section of frame rail to the bottom of the tub and kept it within the wheel wells. This provides more room to mount coil-overs as this has been a common limitation of the factory frame.

The “Krawler” Bumpers. We’ve been designing and manufacturing aftermarket bumpers for trucks and Jeeps for 20 years. Our habit of implementing rugged styling with top-notch function wasn’t going to stop now. The front bumper is designed for maximum clearance and is equipped with D-rings and a winch plate to get you out of any situation. The front winch plate also has an opening in the bottom, this allows you to suck the front suspension down by winching directly to your front axle. Our rear bumper follows the same max clearance design and is also equipped with D-rings.

For the builders. This is designed to be a builder frame. In the current 4×4 and offroad world, everyone is looking for something different. Between suspension designs, shock choices, tire and wheel options, and drivetrain combos; everyone has a different idea of the ultimate wheeling platform. That’s why we offer this as a blank foundation for builders to fabricate and assemble their TJ on.

Make it “Kustom.” Maybe you don’t have the knowledge, tools, or space to build this frame out to what you want it to be. That’s okay! We can work with you to design and build a full rolling chassis to accommodate all of the parts and options you may want!

What’s Included?
• TJ “Krawler” Full Frame
• “Krawler” Front Winch Bumper w/ D-rings & Bottom Winch Line Opening
• “Krawler” Rear Bumper w/ D-rings
• Body Mounts
• Mid-frame Cross Member
• Grill Mount (Shipped loose, may require modification for proper mounting. Grill flange may need modification as well.)
• “Krawler” Specific Skid plate (Optional)

Additional Details and Specs:
• Same Length as a stock TJ
• The front of the frame is raised 2”
• The rear of the frame is raised to 1” below the tailgate. (Will require modification to the rear of the tub to fit.)
• The front of the frame is 29 1/2” wide OD. (25 ½” ID)
• The rear of the frame is 37” wide OD. (33” ID)
DESIGNED FOR USE WITH FULL HYDRO STEERING
This frame is designed to be used with full hydro steering. The way this frame is designed it would be extremely difficult to use a standard steering box setup. If you’re looking to do
a standard steering box setup, give us a call to see what we can do!

Additional information

Weight 480 lbs
Dimensions 150 × 57 × 24 in

Note: Weight and dimensions listed may not represent actual product weight or size and may only be used for shipping purposes.